E-Kabin K

E-Kabin K Series monoblock consoles are designed as general purpose electrical equipment enclosures for indoor applications. They have monoblock body structure and provide IP55 protection degree. The body and door are made of pre-galvanized sheet steel and painted with epoxy polyester powder coating.

Accessible from back

Thanks to hinged rear cover convenient installation is provided.

Possibility of assembly at sides

Locations of mounting rails allows maximum use of side assembly surfaces.

In-door support rails

In door support rails increase the strength of the door and allow of equipment such as cables and cable trays.

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not lose its elasticity in time and provides protection against dust and water.

Top cover with gas spring

Gas springs at both sides enable top cover to be opened or closed and kept in open position safely. They are included in standard supply content.

Back-to-back, double mounting plate possibility

Using of second mounting plate at rear is possible. The second mounting plate must be ordered separately as an accessory.

Depth adjustment of mounting plate

Mounting plate can be adjusted along depth thanks to side mounting rails.

Modular bottom plate arrangement

Bottom plate arrangement complying with high protection degree provides comfort with possibility of sliding piecess. Bottom plates can be equipped with different brushes which can be supplied as accessories.

Type of Mounting Floor-Standing
Modularity Monoblock
Application Indoor
Protection Class IP55
Paint Epoxy – polyester powder paint
Colour Standard RAL 7035 (Grey Colour)
Environmental Class According to EN 60721 – 3 – 3 IE32
Standards IEC 61439-1,
IEC 62208,
IEC 60529,
IEC 62262
  • General
  • Order Codes

Note: Mounting plate is included in the standard supply content.

Please click to enlarge the pictures.